Tuesday, January 17, 2012

Transall C-160 Composite 1450mm (ARF)






This fantastic looking scale model of the European built C-160 goes beyond stand off scale, it is superbly finished and will look the part both on the ground and in the air.

The fuselage is composite, with a high detail finish, complete with all panel lines. The paint finish is realistic and the final touch is added by the high quality and detailed water slide decals. The wings and horizontal stab are balsa and are also nicely covered and finished, the wing is 1pc for easy transportation. There is an excellent hardware package included, as well as the realistic looking 10 wheel landing gear.

There can be no doubt, this fantastic looking Transall is really going to turn heads at your local field, both on the ground and in the air!

Specs:
Wingspan:1450mm
Length: 1178mm
Flying Weight: 2500g~2600g
Wing Area: 22dm2
Wing Loading: 113g~118g/dm2
Airfoil: Torino-16

Requires:
Your Own 4 Channel TX/RX
2 x 35/42 Brushless Outrunner Motors
2 x 30A~40A ESC
2 x 2200mAh 3s Lipoly Battery
4 x Standard Servo
2 x 38mm Spinner

Sbach 342 (Black) EPO 1400mm (PNF)





The Sbach 342 has taken the aerobatic world by storm since its introduction, its combination of stunning good looks and extreme aerobatic capability has made it a firm favourite with RC pilots the world over, now finally a Plug and Play version is available for those who want to get into the air quickly and with the minimum of fuss.

As you would expect, the Sbach is made from tough EPO foam, it is a really quick and simple build that requires no glue, the tail plane simply bolts on and the 2pc wings are a plug in set up, also ideal for transportation. The servos are pre-installed, the elevator/rudder servos being standard size with plenty of torque for aggressive 3D maneuvers. Also pre-installed is the powerful brushless motor and ESC, for maximum performance and efficiency, a 2 blade prop is supplied.

This fantastic looking Sbach 342 offers both the 3D pilot and sport pilot a very capable model with tons of performance and a whole load of presence, the large control surfaces are perfect for just about any maneuver you care to throw at it. This superb Sbach 342 will keep you grinning from ear to ear, just make sure you have plenty of Lipolys to hand, prop hanging the Sbach is addictive!

Features:
Tough EPO Foam construction
Proper hinged control surfaces
Plug in wings for ease of transport
2 Blade prop for maximum thrust on 4s Lipoly
Standard size elevator & rudder servos
Pre-applied waterslide decals
Simple and fast assembly, full instruction book supplied
Seperate canopy for those wanting to install pilot figure
All control surface throws and expo rates given

Specs:
Wingspan: 1400mm
Length: 1400mm
Flying Weight: 2300g
Motor: 4250 Brushless Outrunner 800kv
ESC: 70A w/BEC
Servo: 2 x std size & 2 x 9g

Requires:
Your Own 4 Channel TX/RX
3300mAh 4s Lipoly Battery

Durafly Critical Mass Micro 440mm (PNF)





A super stable sports flyer in a micro package! The Durafly Critical Mass Micro 440mm comes 90% assembled right out of the box and can be ready to fly in just minutes.

The lightweight construction of this model, coupled with a proven airframe design gives this model a locked in feel while performing aerobatics, long smooth knife edge flight is a breeze. Many models of this size are often limited by linear servos or cheap components, but not the Critical Mass! featuring pre-installed, fully proportional HK-5320 Digital servos, a Turnigy ESC and an AP05-3000kv brushless motor The build quality is just fantastic. Fully hinged ailerons are another example of why the Critical Mass stands out from the crowd. This is a fast model to put together, the motor and ESC are pre-installed, leaving you to glue on the wing and cowl then go and fly!

Performance is of course what this model is all about and the Critical Mass is no slouch! Power is delivered courtesy of the powerful Turnigy Brushless motor running on 2s, for reliability a Turnigy ESC is pre-fitted and the servo/ESC connectors are all compatible with the 4 Channel Orange Micro RX (R415). This model might be cheap to put in the air, but make no mistake, this is one seriously capable aerobatic model, just make sure you take a handful of Lipoly batteries with you when you go and fly, racing the Durafly Critical Mass Micro around your local park is addictive!


Specs:
Wingspan: 440mm
Length: 400mm
Flying Weight: 80g
ESC: 6A w/BEC
Servo: HK-5320 Digital 1.7g x 4
Motor: AP05 3000kv Brushless Outrunner

Includes:
Instruction Book
Glue

Requires:
Your Own 4 Channel TX/RX (compatible RX with 1.25mm Molex 3 Pin Connectors)
180mAh 2s Lipoly Battery

Rafale Composite Twin 70mm EDF Jet 800mm (ARF)






The Dassault Rafale is a twin engined delta fighter/multirole combat aircraft that has been designed to be capable of operating from both land and from carriers. It represents the forefront of French aviation technology and has seen action in recent conflicts around the world, including Libya & Afghanistan with both the French Air Force and Navy.

This superb Rafale features a composite fuselage, vertical stabilizer and fixed canards with a balsa constructed delta wing, the paint finish and covering is excellent, the finished model looks really quite striking in its prototype scheme. The Rafale is designed for twin 70mm EDF units (included) and is capable of blistering speeds, comprehensive hardware is supplied with the kit, this includes fixed under-carriage, although it would take little work to convert the model to accept a set of electric servoless retracts, or it would be just as happy being bungee launched.

Being designed around 70mm fans, this Rafale is a great size for transportation and its flight performance is truly outstanding, even with the canards in the fixed position, this superb jet is highly maneuverable. Two fans mean an amazing thrust/weight ratio with the right set up, delivering a realistic jet flying experience for the RC pilot!

Specs:
Wingspan: 800mm
Length: 1060mm
Flying Weight: 1800g

Requires:
Your Own 4~6 Channel TX/RX with elevon mixing
2 x 28mm EDF Brushless Motor
2 x 60A ESC
UBEC
3 x MG High Torque 12g Servo
2 x 2200mAh 4s Lipoly Battery

Sunday, January 15, 2012

F-14 PlayBoy Folding Wing Jet w/ Twin 60mm EDF Kit (USA Warehouse)


Note, this listing is for the black playboy version of the F-14.

A model builders and jet pilots dream!
This F-14 includes a fully operational folding wing, just like the real jet, plus we have included twin 60mm ducted fans each with 2 style of blades, a 3 blade for 5,000kv motors and a 5 blade for 4500kv motors. Both sets of blades (4 in total) are included with the kit so you can choose your motor type and power level. This model also has striking high quality details and water decals, making it as impressive to see on the ground as it is to fly!
This jet has been supplied in kit form because its a modellers product and a fun build, you will need two 26 size inrunner motors, Lipoly battery, escs and servos to make it fly. It will take you 1 or 2 evenings to complete this model.
The Ducted Fan units included with this model are of a high quality and dynamically balanced.

You simply cannot find a better EDF Jet for anything close to this price.


Spec.
Wing Span : 1100mm
Length : 1060mm
Flying Weight: 1100~1300g
Servo: 3x9g, 12kg Torque x 1pc (Not included)
Motor: 2 x 26-XX Brushless outrunner 4800~5000kv (Not included)
ESC: 2 x 30~40A (Not included)
Duct fan: 2 x 60mm
Shaft size: 3~3.17mm

Required.
Your own TX & RX
3x9g, 12kg Torque x 1pc
2 x 26-XX Brushless Motor 4800~5000kv
2 x 30~40A
Battery

Remember, CG changes when the wings fold back, ensure you program in a little up-elevator with the wing folding channel.

IMPORTANT.
READ THIS BEFORE YOU PURCHASE
This plane is quite large. The box size is almost at the size limit for international postage. If you order this model, please do not try to order other large items that we cannot place inside this planes existing box. Smaller items, such as an ESC, screw wire or battery can be purchased with this plane and we will modify the box slightly to accomodate small additional items.

Angel Fighter R/C Ducted Fan Jet Plug-n-Fly (USA Warehouse)



A brilliantly coloured and stickered Angel jet fighter with brushless EDF system.
This EDF jet comes 97% pre-built and includes a powerful 25A brushless electric ducted fan system and steerable nose wheel.
This exciting jet uses a 64mm ducted fan unit to provide fast throttle response.

Specification:
Wingspan: 608mm
Length: 840mm
Wing area: 8.7dm2
Wing load: 57g/dm2
Flying Weight: 550g
Channel: 4ch
Motor: 2601 Brushless Inrunner 4100kv
ESC: 25A
Servo: 4 x 9g
EDF: 64mm
Battery compartment size: 83 x 43 x 33mm

Required:
Your own Tx & Rx
Battery 1300mah 11.1V 3S 25C

Dassault Alpha Fighter 70mm Ducted Fan EPO Plug-n-Fly (USA Warehouse)



Highly scaled, large size aerobatic fighter jet with a big 70mm EDF system.
The Alpha EDF jet comes 97% pre-built and includes a powerful 55A brushless 70mmEDF system and steerable nose wheel.
This well detailed and strikingly painted jet uses a 70mm ducted fan unit to provide fast throttle response and a high top speed.
Scale decals and the addition of two pilots adds to the realism of this model. Battery canopy has more than enough room for a variety of batteries.
Small bead-sized EPO foam means more detail and a stronger, stiffer construction. 5 servos control tail, ailerons and nose gear.

This is a very attractive model that draws attention both in the sky and on the ground!

Specification:
Wingspan: 951mm
Length: 1282mm
Flying Weight: 1110g (39 oz)
Channel: 4ch
Motor: 2750kv Brushless Outrunner
ESC: 50A
Servo: 5 x 9g
EDF: 70mm
Battery compartment size: 150 x 46 x 33mm
Required:
Your own Tx & Rx
Battery 2200mah 14.8V 4S 20C

Mirage 4000 Fighter w/ Brushless EDF & Retracts Plug-n-Fly (USA Warehouse)

Highly scaled aerobatic fighter jet EDF Plug-n-fly.
The Mirage-4000 EDF jet comes 97% pre-built and includes a powerful 45A brushlessEDF system and retractable landing gear.


Specification:
Wingspan: 785mm
Length: 1230mm
Height: 345mm
Flying Weight: 940g
Channel: 6ch
Motor: 2600kv Brushless Outrunner
ESC: 45A
Servo: 7 x 9g
EDF: 70mm
Required:
Your own Tx & Rx
Battery 2200mah 14.8V 4S 20C

90mm EDF JET w/ Air Retracts (Camo version) (PNF) (USA Warehouse)



A very big EDF jet that offers superb performance, huge presence both on the air and on the ground and being a PNF, a quick build. There is plenty of power on tap from the V2 1770kv/90mm fan combo, when used with a 6s Lipoly, slow fly ability is also impressive courtesy of the pre fitted flaps, but that is not what this superb looking jet is all about, high speed and high manevoeverability are the name of the game!

This model features an all moving tailplane as well as a rudder and ailerons, which combined with the light-flying weight and high thrust EDF unit, should satisfy even the most demanding of pilots. Air retracts, good quality servos, a whopping 100A ESC all add up to a reliable and easy to live with large jet. This is an exciting looking big size EDF model that will impress everyone at your next club meeting!

Specification:
Wingspan: 923mm
Length: 1436mm
Wing load: 100g/dm2
Flying Weight: 2200g
Channel: 6ch
Motor: 1770kv 3674 Brushless Inrunner with heatsink (V2)
ESC: 100A
Servo: 9 x 9g
EDF: 90mm

Required:
Your own 6ch Tx & Rx
Battery 3700mah 22.2V 6S 25C

90mm EDF JET w/ Air Retracts (Grey version) (PNF) (USA Warehouse)



A very big EDF jet that offers superb performance, huge presence both on the air and on the ground and being a PNF, a quick build. There is plenty of power on tap from the V2 1770kv/90mm fan combo, when used with a 6s Lipoly, slow fly ability is also impressive courtesy of the pre fitted flaps, but that is not what this superb looking jet is all about, high speed and high manevoeverability are the name of the game!

This model features an all moving tailplane as well as a rudder and ailerons, which combined with the light-flying weight and high thrust EDF unit, should satisfy even the most demanding of pilots. Air retracts, good quality servos, a whopping 100A ESC all add up to a reliable and easy to live with large jet. This is an exciting looking big size EDF model that will impress everyone at your next club meeting!

Specification:
Wingspan: 923mm
Length: 1436mm
Wing load: 100g/dm2
Flying Weight: 2200g
Channel: 6ch
Motor: 1770kv 3674 Brushless Inrunner with heatsink (V2)
ESC: 100A
Servo: 9 x 9g
EDF: 90mm

Required:
Your own 6ch Tx & Rx
Battery 3700mah 22.2V 6S 25C