Friday, October 26, 2012

HXT500 5g / .8kg / .10sec Micro Servo

Size : 22.9x11.4x22 mm / 0.9x0.45x0.87 in
Voltage : 3v ~ 6v
Weight: 5g / 0.18oz
Speed : 0.10 sec/60(4.8V)
Torque : 0.8 kg-cm
Working Temp : -30C~60C
Teflon Bushing, 15cm wire, coreless motor
Servo arms & screw included
These servos can be found on eBay and other asian seller stores at close to this price, however be warned, they do not contain Taiwan/Japan components. HexTronik (the manufacturers of these servos) have two standards, one is for local sale, and the other is export quality with imported connectors and resin gears from Taiwan and Japan.
Our HXT500 and HXT900 are export only, and not built for the domestic market.

Because we order direct from the factory in large batches, the servos can sometimes be red, blue or green, depending on what our wholesale customers requested. Do not be alarmed, the colour does not indicate that it is a different servo.

C2403 Brushless Outrunner 2100kv

C2403 Brushless Outrunner 2100kv

Spec.Battery: 2S /7.4V RPM: 2100kv
Max Power: 120w
No Load current: 1.5A @ 7.4vDimensions: 10 x 30mm
Weight: 17.6g (Including connectors)
Diameter of shaft: 3mm

Performance Data:
Thrust: 330g Prop: 9050Max Current: 10.9ABattery Type: 7.4v 2S

C2404 Brushless Outrunner 1900kv

C2404 Brushless Outrunner 1900kv
Spec.Battery: 2S /7.4V RPM: 1900kvMax Power: 120wNo Load current: 1.5A @ 7.4vDimensions: 10 x 30mmWeight: 20.9g (Including connectors)Diameter of shaft: 3mm
Performance Data:Thrust: 360g Prop: 9050Max Current: 9.4ABattery Type: 7.4v 2S

HobbyKing 12A BlueSeries Brushless Speed Controller

Its no “Mystery” where these ESCs are made, now they are available to you at HobbyKing prices.
Built with imported N-Channel mosFETs and an ultra fast Atmel MCU & heartbeat make this a high performance ESC with excellent sync capabilities.
Programmable via an R/C controller.It allows you to program all functions to fit your specific needs, which makes it efficient and user friendly.

Features: Extremely low internal resistance
Super smooth and accurate throttle linearity
Over heat and over-load protection
Auto shut down when signal is lost or radio interference becomes severe for more than 2 seconds
Supports high RPM motors
Power arming protection (prevents the motor from accidentally running when switched ON)
New Advanced programming software

Programming features:
Brake setting (we recommend using brake for only folding props applications)
Battery type(LiPo or NiCd/NiMh)
Low voltage cutoff setting
Factory default setup restore
Timing settings (to enhance ESC efficiency and smoothness)
Soft acceleration start ups (for delicate gearbox and helicopter applications)
Governor mode(for helicopter applications)
Motor rotation( clockwise\counterclockwise)
Switching frequency
Low voltage cutoff type (power reduction orirnmediate shutdown)

Factory default settings:
Brake:  off Battery type Detect:  LiPo with Automatic Cell
Low voltage cutoff threshold:  Medium (3.0V/65%)
Timing setup:  Automatic
Soft Acceleration Start Up:  Medium Governor mode :  OFF
Frequency :  8kHz
Low voltage cutoff type:  Reduce power
Cont. Current: 12A
Burst Current: 16A/10sec
Battery: 2-4 Cell Lipo / 5-12 Cell Ni-XX
SBEC: 5V/ 1A Output
Size: 22*21*4mm
Weight: 10g